ATX 3.0 PCIe 5.0 600W 3 x 8 Pin to 12VHPWR 12 Pin Power Adapter Cable

NEW Premium Single-Sleeved Custom Tailor-Made ATX 3.0 PCIe 5.0 600W 3 x 8 Pin to 12VHPWR 12 Pin Power Cable

• 3 x 8-Pin to 12-Pin (for RTX 3060 3070 3080 3090)
• 4 x 8-Pin to 16-Pin (for RTX 3090ti 4090 4080 4070)
• 3 x 8-Pin to 16-Pin Angled (for RTX 3090ti 4080 4070)
• 4 x 8-Pin to 16-Pin Angled (for RTX 3090ti 4090 4080 4070)

This is a drop-in replacement for the Nvidia 12VHPWR 12-pin adapter cable (but with premium single split/seam high-current terminals and 12 dedicated wires without sharing/bridging/soldering)

Sleeved Adapter Cable, Built for the new ATX 3.0 PCIe 5.0 12V HPWR Mini 12 pin PSUs

12Pin GPU Cable Pcie 5.0 12VHPWR Sleeved Modular Cables Male to Male PSU Cable Mini 12 pin Adapter 600W Power Supply 

PCI-E 5.0 GPU Cable for Nvidia RTX 3060 3070 3080 3090

ATX 3.0 PCIe 5.0 Quadruple 8 Pin to 12VHPWR (3x8pin to 12VHPWR)

12vhpwr adapter

Cable Type:

• Extension Adapter Cable (for converting regular PCIe power cables to the new 12VHPWR 16-pin port)

Connector:

• 3 x 8 Pin PCIE from PSU to 12VHPWR Mini 12 Pin
  (suitable for any PCIe 5.0 GPUs with 12VHPWR 12-Pin port, e.g. RTX3090/RTX3080)

Cable Length:

• Around 10cm

Cable Style:

• High-Density Sleeved - This is the most popular and elegant style with individual high-density sleeving over each wire with the best protection while maintaining the cable softness and flexibility.

PSU Model:

• Suitable for any PCIe 5.0 GPUs with 12VHPWR 12-Pin port, e.g. RTX3090/RTX3080

Main Features:

• Top-quality ultra-soft silicone wire
• High-density protective sleeving
• Premium newer extended connectors for high-current-system (HCS) rated 160°C
• Premium high-current single-seam 4-String terminals

LIMITED TIME SPECIAL OFFER : FREE SHIPPING WORLDWIDE

Customers Comments:

"this new modDIY adapter, besides being a higher quality.....went right in. Tab snapped and all. No force needed. Been using the PC all day (8 hours) and no melting! Would recommend!"

"yea my nvidia adapter would not snap inall the way on my 4090 tuff, no snap felt like i was guna break the card if i pushed any harder. i got my moddiy cable yesterday and it clicked right in all the way."

"Yes! After about 8 hours of mixed gaming (MW2 and Cyberpunk) I took out the modDIY adapter and checked it. It's fine....and it went right back in and snapped in place no issues."

(Source: Reddit)