Loading... Please wait...

Jump Start EPS/ATX 10 Pin Modular PSU Jumper On/Off Switch (Red Light)

SKU: JS10-RL  |  Brand / Compatible with: MODDIY
Jump Start EPS/ATX 10 Pin Modular PSU Jumper On/Off Switch (Red Light)
  • Jump Start EPS/ATX 10 Pin Modular PSU Jumper On/Off Switch (Red Light)
  • Jump Start EPS/ATX 10 Pin Modular PSU Jumper On/Off Switch (Red Light)
$9.99
Rating:
5/5 1 product review
Availability:
In Stock
(Usually ships within 24 hours)
Shipping:
Free Shipping Worldwide
*PSU Model:

(Maximum Size: . Type: )

Product Description

Jump Start EPS/ATX 10 Pin Modular PSU Jumper On/Off Switch (Red Light)

Do you need to turn on an ATX modular power supply (e.g. Seasonic, Corsair) without a motherboard? Tired of using paperclips, or other rigged methods of turning the system on? Then our ATX Power Supply Reset Switch is the answer.

The switch features a 10-pin female Molex connector that hooks up to your PSU to spoof the motherboard connection. So simply press the button, and turn your power supply on.

Turn on/off modular power supply directly without cables

Write a Review

Product Reviews

  1. 07 Jun 2025

    Hector M

    I've heard good news from the Modding community. <3

    "I've heard good news from the Modding community. <3"

  2. 06 Jun 2025

    Drew L

    Easy to find what I needed. I am trusting your rev...

    "Easy to find what I needed. I am trusting your review on the Honeywell pads. It was a one stop shop. The customer service is top notch. I will definitely purchase from this store again. It was a bit slow on shipping but with what is going on with trade I can't complain. I am sure under normal circumstances it is faster. Stellar company."

  3. 06 Jun 2025

    Michael

    Excellent product and thermals will buy again soon.

    "Excellent product and thermals will buy again soon."

  4. 06 Jun 2025

    Reinhard N

    Mir wurde ein falsches Kabel zugesandt, mir wurde ...

    "Mir wurde ein falsches Kabel zugesandt, mir wurde sofort geholfen und mir wird kostenlos ein neues Kabel zugesandt. Ein Super Kundenservice."

  5. 05 Jun 2025

    Ben M

    This seems great, I haven't had a chance to try it...

    "This seems great, I haven't had a chance to try it yet, but it fits exactly as expected."

  6. 04 Jun 2025

    Alex S

    I was able to easily order the cable I needed in t...

    "I was able to easily order the cable I needed in the length I wanted. I had initially started this process on the cablemod.com website but stopped when I saw the $25 shipping fee for a single cable delivered 400 miles away. Moddyi.com had the exact same cable but for half the price of cablemod ($43.99 vs $81.90). It was an easy decision on where I was going to place my order"

  7. 04 Jun 2025

    Al C

    Your site works very well, better than a lot. Good price too.

    "Your site works very well, better than a lot. Good price too."

  8. 04 Jun 2025

    A Reviewer

    Service is great.

    "Service is great."

  9. 04 Jun 2025

    Daniel

    amazon and ebay did not have the cable I needed, i...

    "amazon and ebay did not have the cable I needed, it was a strange situation where I needed an older 4 pin molex from a modern power supply. Thank you for having what I need. Shipping a tad expensive on the part though."

  10. 04 Jun 2025

    Ian M

    N/A

    "N/A"

  1. 2017-11-11

    joevt

    works

    "The switch is solid. There's a satisfying click or snap as the switch toggles (more than from the power supply's switch).

    The power supply (Corsair SF450) would turn off instantly when I turn the Jumper switch on. I fixed that by removing the 12V wire of the switch. I guess the problem is no other load on that 12V pin? The switch works without the 12V wire. I moved the 12V wire to one of the 4 pin Molex (peripheral) connectors which enables the red light of the switch when the switch is turned on. The 4 pin Molex cable was loaded with a fan.

    Diameter: approximately 20 mm inside for the case hole, 23 mm outside of case.
    Length: 98 mm or 89 mm if you exclude the length of the mating pins part of the 10 pin connector.
    Connector: 9 mm mating pins inside power supply, 9 mm outside power supply; wires: 63 mm; switch: 17 mm. Allow 35 mm for the switch, since the wires are not flexible under the heat shrink part. The external part of the switch (6mm existing outside of the case) is excluded from measurements.
    "