Loading... Please wait...

SATA 2.5 3.5 Hard Drive Adapter to IDE

SKU: STI-2  |  Brand / Compatible with: MODDIY
$24.90
Availability:
In Stock
(Usually ships within 24 hours)

Product Description

Overview

The JM20330 is a single chip solution for serial and parallel ATA translation. It includes the Serial ATA PHY, Link, Transport, and Parallel ATA (application layer) controller. The Serial ATA physical, link, and transport layers are compliant to Serial ATA 1.0 JM20330 supports a 1.5GHz data rate, and scalable to 3.0 GHz data rate by directly doubling the internal clock source. The application layer supports both the ATA register command set and PACKET command set, which could drive both Hard Disk Drive and ATAPI Optical Storage such as CR-ROM, CD-RW, DVD-ROM, DVD-RW, etc. The Serial ATA and the Parallel ATA application layer support both host and device operation and can be configured through a single pin.

Feature Compliance

  • Serial ATA 1.0 Specification compliant

Overall

  • Automatic Serial ATA 3.0/1.5 Gbps speed negotiation
  • ATA/ATAPI PIO mode 0 to 4
  • ATA/ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133, and 150MB/s
  • ATA/ATAPI LBA48 addressing mode associated with 2-byte sector count
  • Support Serial ATA hot-plug
  • Ultra low power consumption
  • Work for both AC and DC couple between the transmitter and the receiver
  • Provide specified OOB signal detection and transmission
  • Support Spread Spectrum Clocking to reduce EMI
  • Support 20MHz, 25MHz, 30MHz or 40MHz Reference Clock
  • Support Partial/Slumber power management
  • Provide adjustable TX signal amplitude and pre-emphasis level
  • Master IDE Device support

Product Requirements

  • Windows 98/SE/ME/2000/XP/2003/Vista/Linux operating system
  • Available 4-pin power supply connector
  • SATA I or SATA II Device
Write a Review

Product Reviews

  1. A Reviewer

    Easy and good, if the shipping goes problem free thi

    16 Nov 2026

  2. Edward A. H

    Searched for 2 weeks for this and YOU had it! I was somewhat set aback by the shipping time but was glad to see it was from Hong Kong. Hong-Kong has an excellent reputation. So you are in good company. I look forward to my purchase. Thank you!

    16 Nov 2026

  3. Simeon M

    Cool

    16 Nov 2026

  4. Aaron C J

    As long as it's not a knock off product A+

    15 Nov 2026

  5. Joshua

    Very well done

    15 Nov 2026

  6. Jason s

    Shopping experience was great, we'll see the product I receive before I'd really recommend you. But I'm very hopeful.

    15 Nov 2026

  7. Aleks P

    Very good quality components

    14 Nov 2026

  8. Justin

    I like your products and the service has been good. Keep up the good work

    14 Nov 2026

  9. Philippe

    Super

    14 Nov 2026

  10. Mark K

    Had specialty item I needed. Thanks

    13 Nov 2026