Loading... Please wait...

Jump Start EPS ATX 10 Pin Modular PSU Jumper On Off Switch Red Light

SKU: CO1046  |  Brand / Compatible with: MODDIY
Jump Start EPS ATX 10 Pin Modular PSU Jumper
  • Jump Start EPS ATX 10 Pin Modular PSU Jumper
  • Jump Start EPS/ATX 10 Pin Modular PSU Jumper On/Off Switch (Red Light)
  • Jump Start EPS/ATX 10 Pin Modular PSU Jumper On/Off Switch (Red Light)
$9.99
Rating:
5/5 1 product review
Availability:
In Stock
(Usually ships within 24 hours)
*PSU Model:

(Maximum Size: . Type: )

Product Description

Jump Start EPS/ATX 10 Pin Modular PSU Jumper On/Off Switch (Red Light)

Do you need to turn on an ATX modular power supply (e.g. Seasonic, Corsair) without a motherboard? Tired of using paperclips, or other rigged methods of turning the system on? Then our ATX Power Supply Reset Switch is the answer.

The switch features a 10-pin female Molex connector that hooks up to your PSU to spoof the motherboard connection. So simply press the button, and turn your power supply on.

Turn on/off modular power supply directly without cables

Write a Review

Product Reviews

  1. Steven W

    Super quick and easy to find, register and order

    18 May 2026

  2. mark h

    So far, so good , I'll wait and see what transpires.

    17 May 2026

  3. Ryan

    Quality products and a wide range of variety.

    17 May 2026

  4. christian l

    everything was fine

    16 May 2026

  5. Rohan C

    good experience

    16 May 2026

  6. A Reviewer

    Carrie was able to help with a request to change the order straight after making it, and despite an initial misunderstanding, which was handled well, everything needed was accomodated in offering the desired payment method and addressing the issue - problem solved. Thanks.

    16 May 2026

  7. Michael

    Item was as described and was nice quality. It arrived quickly as well.

    16 May 2026

  8. Markus H

    We'll see how the shippment will be and how the material will look like when it'll arrive but so far I'm happy with your shop and the shopping experience. But I'm still waiting for the new mainboard so the package is still originally sealed and will be unpacked as soon as the mainboard arrived and I'll setup the new processor.

    16 May 2026

  9. Terron F

    Faster than expected!

    16 May 2026

  10. Jacob R

    Great selection - doing good so far!

    16 May 2026

  1. joevt

    The switch is solid. There's a satisfying click or snap as the switch toggles (more than from the power supply's switch).

    The power supply (Corsair SF450) would turn off instantly when I turn the Jumper switch on. I fixed that by removing the 12V wire of the switch. I guess the problem is no other load on that 12V pin? The switch works without the 12V wire. I moved the 12V wire to one of the 4 pin Molex (peripheral) connectors which enables the red light of the switch when the switch is turned on. The 4 pin Molex cable was loaded with a fan.

    Diameter: approximately 20 mm inside for the case hole, 23 mm outside of case.
    Length: 98 mm or 89 mm if you exclude the length of the mating pins part of the 10 pin connector.
    Connector: 9 mm mating pins inside power supply, 9 mm outside power supply; wires: 63 mm; switch: 17 mm. Allow 35 mm for the switch, since the wires are not flexible under the heat shrink part. The external part of the switch (6mm existing outside of the case) is excluded from measurements.

    2017-11-11