Loading... Please wait...

Jump Start EPS ATX 10 Pin Modular PSU Jumper On Off Switch Red Light

SKU: CO1046  |  Brand / Compatible with: MODDIY
Jump Start EPS ATX 10 Pin Modular PSU Jumper
  • Jump Start EPS ATX 10 Pin Modular PSU Jumper
  • Jump Start EPS/ATX 10 Pin Modular PSU Jumper On/Off Switch (Red Light)
  • Jump Start EPS/ATX 10 Pin Modular PSU Jumper On/Off Switch (Red Light)
$9.99
Rating:
5/5 2 product reviews
Availability:
In Stock
(Usually ships within 24 hours)
*PSU Model:

(Maximum Size: . Type: )

Product Description

Jump Start EPS/ATX 10 Pin Modular PSU Jumper On/Off Switch (Red Light)

Do you need to turn on an ATX modular power supply (e.g. Seasonic, Corsair) without a motherboard? Tired of using paperclips, or other rigged methods of turning the system on? Then our ATX Power Supply Reset Switch is the answer.

The switch features a 10-pin female Molex connector that hooks up to your PSU to spoof the motherboard connection. So simply press the button, and turn your power supply on.

Turn on/off modular power supply directly without cables

Write a Review

Product Reviews

  1. Joshua M

    Easy to use site. Was slightly disappointed that u paid for 2 day business but did not receive delivery for a week. (I did not realize it was shipping from China which would mean holdover in customs)

    17 Aug 2026

  2. Andy

    I like the sharpness of the images. Very useful for none experts. I hope this fits my ceiling fan down rod.

    17 Aug 2026

  3. Danelbis

    Shopping experience was good. Just need to see if the product is good as well. If it is, then I will give you 5 stars.

    17 Aug 2026

  4. A Reviewer

    Site was easy to use and navigate.

    16 Aug 2026

  5. Brett

    Quick and easy, now to see if it arrives.

    16 Aug 2026

  6. Don

    Was a little disappointed with my latest order. I had ordered twice. First order which were PSU cables were fabulous. The second and most recent was the grills with mesh filter for the drive bays. 1: they do NOT just snap in..had to glue them onto the case! 2: they did not fit properly. Had to bend the tip lip of one of the mesh covers so when fitting it would not interfere with the PC front headers, the USB, reset button, etc. area on the front of the Phantaks Pro full tower. Once all that was done they look decent enough.

    16 Aug 2026

  7. A Reviewer

    Chat helped confirm correct product

    16 Aug 2026

  8. Abdulrahman O

    website is easy to navigate and payment is simple.

    16 Aug 2026

  9. Daniel T

    fast and easy website

    15 Aug 2026

  10. Nathan

    Good customer service

    15 Aug 2026

  1. A Reviewer

    The Customer service was great, best ever

    2026-07-31

  2. joevt

    The switch is solid. There's a satisfying click or snap as the switch toggles (more than from the power supply's switch).

    The power supply (Corsair SF450) would turn off instantly when I turn the Jumper switch on. I fixed that by removing the 12V wire of the switch. I guess the problem is no other load on that 12V pin? The switch works without the 12V wire. I moved the 12V wire to one of the 4 pin Molex (peripheral) connectors which enables the red light of the switch when the switch is turned on. The 4 pin Molex cable was loaded with a fan.

    Diameter: approximately 20 mm inside for the case hole, 23 mm outside of case.
    Length: 98 mm or 89 mm if you exclude the length of the mating pins part of the 10 pin connector.
    Connector: 9 mm mating pins inside power supply, 9 mm outside power supply; wires: 63 mm; switch: 17 mm. Allow 35 mm for the switch, since the wires are not flexible under the heat shrink part. The external part of the switch (6mm existing outside of the case) is excluded from measurements.

    2017-11-11